Related products

• 

  OTE03 Luxurious Electric Operating Table

  Read more
  ×

  

  OTE03 Luxurious Electric Operating Table

  • Hydraulic system, high safety and reliability
  • Longitudinal shift function
  • Back-rest -20°-80°, knee-rest -90°-15°,head-rest -90º-45º, trendelenburg and reverse trendelenburg 25°, lateral tilt 20°, height adjustment 700mm-1000mm
  • Back section with X ray cassette layer
  • Memory foam pads
  • Stainless steel frame
  • Electric brake system for optimum stability
  • Detachable head plate and leg plate meet operation position needs
  • One key reset function
  • Hand control buttons are simple, intuitive and easy to operate
  • Kidney bridge lifting

  Categories: Hospital Furniture, Others Tag: Operating table
• 

  BE31 Three Function Full Electric Bed

  Read more
  ×

  

  BE31 Three Function Full Electric Bed

  • Leg-rest 35°±10°, Back-rest 75°±10°, Trendelenburg&Reverse Trendelenburg 12°±3°, height adjustment 455mm-745mm.
  • ABS bed head and foot board, can be detached.
  • 6 column metal side rail, can be foldable with a button.
  • The hospital bed features durable, noise-reducing, and corrosion-resistant 125mm TPE casters with independent brakes and anti-winding design, suitable for various medical environments.
  • Each linear motor in the hospital bed controls a specific function, operates below 50 dB, and is designed for a long life with 20,000 movements.
  • Soft plastic bumper covers are located at each corner of the hospital bed to absorb impacts and protect the bed and surroundings while minimizing disturbances to patients.
  • The bed is equipped with an adjustable stainless steel IV pole with four hooks and previsions at each corner for flexible medical setups.
  • The hand controller, connected by a cable and equipped with a hook, controls adjustments for the back and leg sections, overall bed height, and synchronized movements, enhancing convenience and functionality.

  Categories: Hospital Beds, Hospital Furniture Tag: Hospital Bed
• 

  HPT03S Patient Transfer Stretcher

  Read more
  ×

  

  HPT03S Patient Transfer Stretcher

  • The back section can be raised up to 75°±5° using a lever, supported by a gas spring for smooth control.
  • The knee section can bed raised up to 30°±5°using a hand crank.
  • Trendelenburgand teverse Trendelenburg can be raised up to 15°±5°, whole stretcher can be raised from 600mm to 903mm, using control pedal.
  • Dual hydraulic pumps adjust the stretcher’s height and tilt for precise positioning and patient comfort.
  • Foldable metal side rail with safe lock, more safety.
  • Whole platform X-ray translucent, with movable x-ray box controlled by hand crank.
  • The stretcher is equipped with four 200mm diameter TPE wheels for easier maneuverability and durability.
  • Central locking pedals at both ends of the stretcher allow for all wheels to be quickly locked or released.
  • A fifth steering wheel, controlled by a pedal system, enables straight-line movement or free roaming.
  • Two foldable, height-adjustable stainless steel IV poles with four hooks each are complemented by additional IV sockets on the bed’s edges.
  • The foldable emergency push handle enhances control and speed in urgent situations.
  • Soft, impact-absorbing bumper wheels at each corner protect the stretcher, the environment, and the patient during impacts.

  Categories: Hospital Furniture, Others Tag: Medical Stretcher
• 

  BM50 Multi-Functional Manual Medical Bed

  Read more
  ×

  

  BM50 Multi-Functional Manual Medical Bed

  • Back section adjusts up to 75°, leg section up to 35°, Trendelenburg and Reverse Trendelenburg12° for patient comfort and medical needs.
  • Bed height can be adjusted between 455mm and 745mm to facilitate patient transfers and caregiver ergonomics.
  • Equipped with 380mm high PP side rails with a damped lift design for patient protection.
  • ABS detachable bed head and foot boards.
  • 5” double-side casters that pass dynamic tests for durability, featuring an anti-winding design.
  • Central locking pedals located at the bed’s tail for easy engagement of brakes on all casters simultaneously.
  • Full stainless steel IV pole, capable of bearing 15kg, with provisions for placement at each bed corner.
  • ABS Hand cranks and structural components built to withstand extensive use, ensuring longevity.

  Categories: Hospital Beds, Hospital Furniture Tag: Hospital Bed

×

BAM203 Hospital Mattress
KSh220,000 Original price was: KSh220,000.KSh200,000Current price is: KSh200,000.
• Size can be customized
• PU cover
• High-density sponge core
 
Add to cart
×

STC54 Hospital Stainless Steel Cart
KSh100,000
• Utilizing precision cutting and seamless welding technology
• Two shelves maximizing the utility
• The guardrails along the sides provides protection against item displacement
• 4-inch casters, including two with independent brake pedal
Add to cart
×

MC21S Multi-functional Monitor Cart
• Robust security with a central locking system for the drawers.
• Ergonomic design featuring an adjustable upper column for monitor positioning.
• Sliding side shelf to provide additional workspace when needed.
• Customizable computer accessories to suit varying technological requirements.
• Four-layer self-priming drawer system with configurable dividers for organized storage.
• Silent, medical-grade 4-inch dual-wheel casters with brakes for easy maneuverability and stability.
• Ring-shaped anti-collision handle to protect both the workstation and staff.
• Electromechanical layer designed for optimal heat dissipation to protect medication integrity.
• Color-coded waste bins to ensure proper segregation and disposal of medical waste.
×

AT85 ABS Anaesthesia Cart
• Constructed from durable ABS and aluminum alloy for strength and corrosion resistance.
• Equipped with multiple drawers (two small, two medium, one large) that include adjustable dividers for customizable storage.
• Features two rows of five transparent compartments each, mounted on an adjustable height stand for flexible positioning.
• Incorporates a retractable side shelf that can be used as an additional workspace or for placing larger medical equipment.
• Oxygen cylinder holder and CPR board on back.
• Offers a centralized locking mechanism controlling all drawers with a single key for enhanced security.
• Fitted with four-inch dual-wheel casters, two of which have brakes, made from high-strength polyurethane for smooth, quiet mobility.
• Contains two separate dust baskets to facilitate the segregation of medical waste.
• Features a high-visibility yellow, secure compartment for the disposal of sharps.
• Includes a semi-transparent, side-opening file box for easy access and visibility of stored documents.
×

HPT03S Patient Transfer Stretcher
• The back section can be raised up to 75°±5° using a lever, supported by a gas spring for smooth control.
• The knee section can bed raised up to 30°±5°using a hand crank.
• Trendelenburgand teverse Trendelenburg can be raised up to 15°±5°, whole stretcher can be raised from 600mm to 903mm, using control pedal.
• Dual hydraulic pumps adjust the stretcher’s height and tilt for precise positioning and patient comfort.
• Foldable metal side rail with safe lock, more safety.
• Whole platform X-ray translucent, with movable x-ray box controlled by hand crank.
• The stretcher is equipped with four 200mm diameter TPE wheels for easier maneuverability and durability.
• Central locking pedals at both ends of the stretcher allow for all wheels to be quickly locked or released.
• A fifth steering wheel, controlled by a pedal system, enables straight-line movement or free roaming.
• Two foldable, height-adjustable stainless steel IV poles with four hooks each are complemented by additional IV sockets on the bed’s edges.
• The foldable emergency push handle enhances control and speed in urgent situations.
• Soft, impact-absorbing bumper wheels at each corner protect the stretcher, the environment, and the patient during impacts.
×

OTE03 Luxurious Electric Operating Table
• Hydraulic system, high safety and reliability
• Longitudinal shift function
• Back-rest -20°-80°, knee-rest -90°-15°,head-rest -90º-45º, trendelenburg and reverse trendelenburg 25°, lateral tilt 20°, height adjustment 700mm-1000mm
• Back section with X ray cassette layer
• Memory foam pads
• Stainless steel frame
• Electric brake system for optimum stability
• Detachable head plate and leg plate meet operation position needs
• One key reset function
• Hand control buttons are simple, intuitive and easy to operate
• Kidney bridge lifting
×

ETE01 Electric Examination Table
• Removable pillow
• Face hole for ergonomic body positioning
• Steel frame, high-quality PVC surface, high resilience sponge inside
• Height adjustment 480mm-850mm, leg section lifting 0°-75°±5°, head section adjustment -65° -35°±5°,  waist lifting 25°.
• Armrest is removable and adjustable
• Back section 10 level lifting system, fit different needs
• 2 moving casters
• Gas spring system
×

TX-2 Electric Hospital Dialysis Chair
• Multi-position adjustment, using high-performance imported noiseless motor, easy adjustment of backrest and legs.
• Hand control buttons are simple, intuitive and easy to operate.
• High-density sponge mattress, long sitting and lying will not get tired.
• PVC leather,durable, luxurious and comfortable.
• Retractable, foldable footrest provides comfort for patients during dialysis.
• The lateral adjustable handrail is designed to provide the best dialysis position for the patient.
×

CBD100 Blood Donation Chair
• Purpose-built design
• Sturdy plastic steel frame
• PU leather surface filled with high-quality sponge
• Functional feet covers
×

OBT209 Hospital Overbed Table
• ABS white table top
• 2.5’’ caster with brake
• T-shaped base, dual-material construction
• Aluminium alloy lifting column
• Handle adjust the height, 740mm-1040mm
×

BSC100 Hospital Bedside Cabinet ABS Storage
Hospital bedside cabinets play a crucial role in providing patients with a convenient and organized space for storing personal belongings and essential medical supplies. One material that has gained popularity in the manufacturing of BSC100 cabinets is ABS (Acrylonitrile Butadiene Styrene).
1. Durability and Strength
2. Hygienic and Easy to Clean
3. Versatile storage option
4. Aesthetically pleasing design
5. Noise reduction
BSC100 ABS hospital bedside cabinets offer a myriad of benefits to both patients and healthcare professionals. With their durability, ease of cleaning, versatile storage options, and aesthetically pleasing designs, ABS cabinets provide a reliable and efficient solution for maintaining organization and hygiene in hospital rooms. ABS bedside cabinets not only enhances the patient experience but also contributes to the overall safety and efficiency of healthcare facilities.
×

CAC01 Hospital Sleeper Chair
• Recliner and seat dual-purpose companion chair
• Leather chair surface
• 360° full smooth welding
• Armrest as side rail design
• 2 inch 3 inch wheel combination
• Effort-saving lifting rope when standing up
×

CAC02 Hospital Sleeper Folding Sofa Bed
• Recliner and seat dual-purpose companion chair
• PU leather chair surface
• Wooden handrail
• Effort-saving lifting rope when standing up
• High quality springback sponge
×

BMW2S1 Table Board Manual Hospital Bed
• Robot 360°full smooth welding technology
• Back-rest 75°±10°, knee-rest 35°±10°
• ABS material injected plastic bed end, with safe lock
• Anti-pinch design 6 column metal collapsible side rail
• Fodable ABS table board
• 2 ABS manual cranks control the 2 functions
×

BM50 Multi-Functional Manual Medical Bed
• Back section adjusts up to 75°, leg section up to 35°, Trendelenburg and Reverse Trendelenburg12° for patient comfort and medical needs.
• Bed height can be adjusted between 455mm and 745mm to facilitate patient transfers and caregiver ergonomics.
• Equipped with 380mm high PP side rails with a damped lift design for patient protection.
• ABS detachable bed head and foot boards.
• 5” double-side casters that pass dynamic tests for durability, featuring an anti-winding design.
• Central locking pedals located at the bed’s tail for easy engagement of brakes on all casters simultaneously.
• Full stainless steel IV pole, capable of bearing 15kg, with provisions for placement at each bed corner.
• ABS Hand cranks and structural components built to withstand extensive use, ensuring longevity.
×

BE31 Three Function Full Electric Bed
• Leg-rest 35°±10°, Back-rest 75°±10°, Trendelenburg&Reverse Trendelenburg 12°±3°, height adjustment 455mm-745mm.
• ABS bed head and foot board, can be detached.
• 6 column metal side rail, can be foldable with a button.
• The hospital bed features durable, noise-reducing, and corrosion-resistant 125mm TPE casters with independent brakes and anti-winding design, suitable for various medical environments.
• Each linear motor in the hospital bed controls a specific function, operates below 50 dB, and is designed for a long life with 20,000 movements.
• Soft plastic bumper covers are located at each corner of the hospital bed to absorb impacts and protect the bed and surroundings while minimizing disturbances to patients.
• The bed is equipped with an adjustable stainless steel IV pole with four hooks and previsions at each corner for flexible medical setups.
• The hand controller, connected by a cable and equipped with a hook, controls adjustments for the back and leg sections, overall bed height, and synchronized movements, enhancing convenience and functionality.
×

BE50B Hospital Electric Medical Bed
The BE50B functional electric hospital beds are designed to cater to the diverse and critical needs of patients in an intensive care unit. This versatile bed offers functionalities such as adjustable height, back-rest, and knee-rest, providing healthcare professionals with the ability to customize the patient’s positioning for optimal comfort and care. Additionally, the trendelenburg and reverse trendelenburg features enable effective positioning for medical procedures and improved patient circulation. The bed’s electric functionality not only enhances efficiency for caregivers but also ensures smooth and precise adjustments for patient comfort.
×

BE32A Three Function Full Electric Bed
• Bed height adjustment 455-745mm, back-rest 75°±10°, knee-rest 35°±10°
• PP side rail, foldable
• ABS bed end, with safe lock
• One-time stamping smooth bed board
• 5’’double-side caster, with central locking pedal
×

BE23 Two Function Full Electric Hospital Bed
• Full electric hospital beds are designed with patient comfort and medical efficiency in mind.
• They feature adjustable back and leg sections that are controlled by quiet linear motors.
• Back-rest 75°±10°, Knee-rest 35°±10°.
• Safety is prioritized with full-length metal side rails that have secure locking and anti-entrapment features.
• Bumper covers at each corner protect the bed and the facility’s walls during movement.
• Mobility is enhanced by anti-winding casters equipped with independent brakes for secure positioning.
• IV pole are available at each corner, supporting versatile medical care, with multiple hooks can be adjusted in height to suit various needs.
• An accessible hand controller allows for easy operation of bed adjustments by patients or caregivers.
• A monkey pole at the head of the bed enables patients to reposition themselves, aiding in independence and recovery.
×

BE71 Multifunction Electric ICU Bed
 
• Robot 360°smooth welding
• Galvanized cold-rolled steel, briquetted by a one-time impact process platform
• ABS bed ends, curved shape, with safe lock
• PP side rail, built-in operating panel and angle display
• Electric and manual CPR release
• Back section auto-regression design
• Back-rest 75°±10°, knee-rest 35°±10°, trendelenburg and reverse trendelenburg 12°±3°, height adjustment 500mm-950mm, extension 2040mm-2240mm
• TPE 6’’double-side casters, with central locking
×

BAM203 Hospital Mattress
KSh220,000 Original price was: KSh220,000.KSh200,000Current price is: KSh200,000.
• Size can be customized
• PU cover
• High-density sponge core
 
Add to cart
×

STC54 Hospital Stainless Steel Cart
KSh100,000
• Utilizing precision cutting and seamless welding technology
• Two shelves maximizing the utility
• The guardrails along the sides provides protection against item displacement
• 4-inch casters, including two with independent brake pedal
Add to cart
×

MC21S Multi-functional Monitor Cart
• Robust security with a central locking system for the drawers.
• Ergonomic design featuring an adjustable upper column for monitor positioning.
• Sliding side shelf to provide additional workspace when needed.
• Customizable computer accessories to suit varying technological requirements.
• Four-layer self-priming drawer system with configurable dividers for organized storage.
• Silent, medical-grade 4-inch dual-wheel casters with brakes for easy maneuverability and stability.
• Ring-shaped anti-collision handle to protect both the workstation and staff.
• Electromechanical layer designed for optimal heat dissipation to protect medication integrity.
• Color-coded waste bins to ensure proper segregation and disposal of medical waste.
×

AT85 ABS Anaesthesia Cart
• Constructed from durable ABS and aluminum alloy for strength and corrosion resistance.
• Equipped with multiple drawers (two small, two medium, one large) that include adjustable dividers for customizable storage.
• Features two rows of five transparent compartments each, mounted on an adjustable height stand for flexible positioning.
• Incorporates a retractable side shelf that can be used as an additional workspace or for placing larger medical equipment.
• Oxygen cylinder holder and CPR board on back.
• Offers a centralized locking mechanism controlling all drawers with a single key for enhanced security.
• Fitted with four-inch dual-wheel casters, two of which have brakes, made from high-strength polyurethane for smooth, quiet mobility.
• Contains two separate dust baskets to facilitate the segregation of medical waste.
• Features a high-visibility yellow, secure compartment for the disposal of sharps.
• Includes a semi-transparent, side-opening file box for easy access and visibility of stored documents.
×

HPT03S Patient Transfer Stretcher
• The back section can be raised up to 75°±5° using a lever, supported by a gas spring for smooth control.
• The knee section can bed raised up to 30°±5°using a hand crank.
• Trendelenburgand teverse Trendelenburg can be raised up to 15°±5°, whole stretcher can be raised from 600mm to 903mm, using control pedal.
• Dual hydraulic pumps adjust the stretcher’s height and tilt for precise positioning and patient comfort.
• Foldable metal side rail with safe lock, more safety.
• Whole platform X-ray translucent, with movable x-ray box controlled by hand crank.
• The stretcher is equipped with four 200mm diameter TPE wheels for easier maneuverability and durability.
• Central locking pedals at both ends of the stretcher allow for all wheels to be quickly locked or released.
• A fifth steering wheel, controlled by a pedal system, enables straight-line movement or free roaming.
• Two foldable, height-adjustable stainless steel IV poles with four hooks each are complemented by additional IV sockets on the bed’s edges.
• The foldable emergency push handle enhances control and speed in urgent situations.
• Soft, impact-absorbing bumper wheels at each corner protect the stretcher, the environment, and the patient during impacts.
×

OTE03 Luxurious Electric Operating Table
• Hydraulic system, high safety and reliability
• Longitudinal shift function
• Back-rest -20°-80°, knee-rest -90°-15°,head-rest -90º-45º, trendelenburg and reverse trendelenburg 25°, lateral tilt 20°, height adjustment 700mm-1000mm
• Back section with X ray cassette layer
• Memory foam pads
• Stainless steel frame
• Electric brake system for optimum stability
• Detachable head plate and leg plate meet operation position needs
• One key reset function
• Hand control buttons are simple, intuitive and easy to operate
• Kidney bridge lifting
×

ETE01 Electric Examination Table
• Removable pillow
• Face hole for ergonomic body positioning
• Steel frame, high-quality PVC surface, high resilience sponge inside
• Height adjustment 480mm-850mm, leg section lifting 0°-75°±5°, head section adjustment -65° -35°±5°,  waist lifting 25°.
• Armrest is removable and adjustable
• Back section 10 level lifting system, fit different needs
• 2 moving casters
• Gas spring system
×

TX-2 Electric Hospital Dialysis Chair
• Multi-position adjustment, using high-performance imported noiseless motor, easy adjustment of backrest and legs.
• Hand control buttons are simple, intuitive and easy to operate.
• High-density sponge mattress, long sitting and lying will not get tired.
• PVC leather,durable, luxurious and comfortable.
• Retractable, foldable footrest provides comfort for patients during dialysis.
• The lateral adjustable handrail is designed to provide the best dialysis position for the patient.
×

CBD100 Blood Donation Chair
• Purpose-built design
• Sturdy plastic steel frame
• PU leather surface filled with high-quality sponge
• Functional feet covers
×

OBT209 Hospital Overbed Table
• ABS white table top
• 2.5’’ caster with brake
• T-shaped base, dual-material construction
• Aluminium alloy lifting column
• Handle adjust the height, 740mm-1040mm
×

BSC100 Hospital Bedside Cabinet ABS Storage
Hospital bedside cabinets play a crucial role in providing patients with a convenient and organized space for storing personal belongings and essential medical supplies. One material that has gained popularity in the manufacturing of BSC100 cabinets is ABS (Acrylonitrile Butadiene Styrene).
1. Durability and Strength
2. Hygienic and Easy to Clean
3. Versatile storage option
4. Aesthetically pleasing design
5. Noise reduction
BSC100 ABS hospital bedside cabinets offer a myriad of benefits to both patients and healthcare professionals. With their durability, ease of cleaning, versatile storage options, and aesthetically pleasing designs, ABS cabinets provide a reliable and efficient solution for maintaining organization and hygiene in hospital rooms. ABS bedside cabinets not only enhances the patient experience but also contributes to the overall safety and efficiency of healthcare facilities.
×

CAC01 Hospital Sleeper Chair
• Recliner and seat dual-purpose companion chair
• Leather chair surface
• 360° full smooth welding
• Armrest as side rail design
• 2 inch 3 inch wheel combination
• Effort-saving lifting rope when standing up
×

CAC02 Hospital Sleeper Folding Sofa Bed
• Recliner and seat dual-purpose companion chair
• PU leather chair surface
• Wooden handrail
• Effort-saving lifting rope when standing up
• High quality springback sponge
×

BMW2S1 Table Board Manual Hospital Bed
• Robot 360°full smooth welding technology
• Back-rest 75°±10°, knee-rest 35°±10°
• ABS material injected plastic bed end, with safe lock
• Anti-pinch design 6 column metal collapsible side rail
• Fodable ABS table board
• 2 ABS manual cranks control the 2 functions
×

BM50 Multi-Functional Manual Medical Bed
• Back section adjusts up to 75°, leg section up to 35°, Trendelenburg and Reverse Trendelenburg12° for patient comfort and medical needs.
• Bed height can be adjusted between 455mm and 745mm to facilitate patient transfers and caregiver ergonomics.
• Equipped with 380mm high PP side rails with a damped lift design for patient protection.
• ABS detachable bed head and foot boards.
• 5” double-side casters that pass dynamic tests for durability, featuring an anti-winding design.
• Central locking pedals located at the bed’s tail for easy engagement of brakes on all casters simultaneously.
• Full stainless steel IV pole, capable of bearing 15kg, with provisions for placement at each bed corner.
• ABS Hand cranks and structural components built to withstand extensive use, ensuring longevity.
×

BE31 Three Function Full Electric Bed
• Leg-rest 35°±10°, Back-rest 75°±10°, Trendelenburg&Reverse Trendelenburg 12°±3°, height adjustment 455mm-745mm.
• ABS bed head and foot board, can be detached.
• 6 column metal side rail, can be foldable with a button.
• The hospital bed features durable, noise-reducing, and corrosion-resistant 125mm TPE casters with independent brakes and anti-winding design, suitable for various medical environments.
• Each linear motor in the hospital bed controls a specific function, operates below 50 dB, and is designed for a long life with 20,000 movements.
• Soft plastic bumper covers are located at each corner of the hospital bed to absorb impacts and protect the bed and surroundings while minimizing disturbances to patients.
• The bed is equipped with an adjustable stainless steel IV pole with four hooks and previsions at each corner for flexible medical setups.
• The hand controller, connected by a cable and equipped with a hook, controls adjustments for the back and leg sections, overall bed height, and synchronized movements, enhancing convenience and functionality.
×

BE50B Hospital Electric Medical Bed
The BE50B functional electric hospital beds are designed to cater to the diverse and critical needs of patients in an intensive care unit. This versatile bed offers functionalities such as adjustable height, back-rest, and knee-rest, providing healthcare professionals with the ability to customize the patient’s positioning for optimal comfort and care. Additionally, the trendelenburg and reverse trendelenburg features enable effective positioning for medical procedures and improved patient circulation. The bed’s electric functionality not only enhances efficiency for caregivers but also ensures smooth and precise adjustments for patient comfort.
×

BE32A Three Function Full Electric Bed
• Bed height adjustment 455-745mm, back-rest 75°±10°, knee-rest 35°±10°
• PP side rail, foldable
• ABS bed end, with safe lock
• One-time stamping smooth bed board
• 5’’double-side caster, with central locking pedal
×

BE23 Two Function Full Electric Hospital Bed
• Full electric hospital beds are designed with patient comfort and medical efficiency in mind.
• They feature adjustable back and leg sections that are controlled by quiet linear motors.
• Back-rest 75°±10°, Knee-rest 35°±10°.
• Safety is prioritized with full-length metal side rails that have secure locking and anti-entrapment features.
• Bumper covers at each corner protect the bed and the facility’s walls during movement.
• Mobility is enhanced by anti-winding casters equipped with independent brakes for secure positioning.
• IV pole are available at each corner, supporting versatile medical care, with multiple hooks can be adjusted in height to suit various needs.
• An accessible hand controller allows for easy operation of bed adjustments by patients or caregivers.
• A monkey pole at the head of the bed enables patients to reposition themselves, aiding in independence and recovery.
×

BE71 Multifunction Electric ICU Bed
 
• Robot 360°smooth welding
• Galvanized cold-rolled steel, briquetted by a one-time impact process platform
• ABS bed ends, curved shape, with safe lock
• PP side rail, built-in operating panel and angle display
• Electric and manual CPR release
• Back section auto-regression design
• Back-rest 75°±10°, knee-rest 35°±10°, trendelenburg and reverse trendelenburg 12°±3°, height adjustment 500mm-950mm, extension 2040mm-2240mm
• TPE 6’’double-side casters, with central locking
×

BAM203 Hospital Mattress
KSh220,000 Original price was: KSh220,000.KSh200,000Current price is: KSh200,000.
• Size can be customized
• PU cover
• High-density sponge core
 
Add to cart
×

STC54 Hospital Stainless Steel Cart
KSh100,000
• Utilizing precision cutting and seamless welding technology
• Two shelves maximizing the utility
• The guardrails along the sides provides protection against item displacement
• 4-inch casters, including two with independent brake pedal
Add to cart
×

MC21S Multi-functional Monitor Cart
• Robust security with a central locking system for the drawers.
• Ergonomic design featuring an adjustable upper column for monitor positioning.
• Sliding side shelf to provide additional workspace when needed.
• Customizable computer accessories to suit varying technological requirements.
• Four-layer self-priming drawer system with configurable dividers for organized storage.
• Silent, medical-grade 4-inch dual-wheel casters with brakes for easy maneuverability and stability.
• Ring-shaped anti-collision handle to protect both the workstation and staff.
• Electromechanical layer designed for optimal heat dissipation to protect medication integrity.
• Color-coded waste bins to ensure proper segregation and disposal of medical waste.
×

AT85 ABS Anaesthesia Cart
• Constructed from durable ABS and aluminum alloy for strength and corrosion resistance.
• Equipped with multiple drawers (two small, two medium, one large) that include adjustable dividers for customizable storage.
• Features two rows of five transparent compartments each, mounted on an adjustable height stand for flexible positioning.
• Incorporates a retractable side shelf that can be used as an additional workspace or for placing larger medical equipment.
• Oxygen cylinder holder and CPR board on back.
• Offers a centralized locking mechanism controlling all drawers with a single key for enhanced security.
• Fitted with four-inch dual-wheel casters, two of which have brakes, made from high-strength polyurethane for smooth, quiet mobility.
• Contains two separate dust baskets to facilitate the segregation of medical waste.
• Features a high-visibility yellow, secure compartment for the disposal of sharps.
• Includes a semi-transparent, side-opening file box for easy access and visibility of stored documents.
×

HPT03S Patient Transfer Stretcher
• The back section can be raised up to 75°±5° using a lever, supported by a gas spring for smooth control.
• The knee section can bed raised up to 30°±5°using a hand crank.
• Trendelenburgand teverse Trendelenburg can be raised up to 15°±5°, whole stretcher can be raised from 600mm to 903mm, using control pedal.
• Dual hydraulic pumps adjust the stretcher’s height and tilt for precise positioning and patient comfort.
• Foldable metal side rail with safe lock, more safety.
• Whole platform X-ray translucent, with movable x-ray box controlled by hand crank.
• The stretcher is equipped with four 200mm diameter TPE wheels for easier maneuverability and durability.
• Central locking pedals at both ends of the stretcher allow for all wheels to be quickly locked or released.
• A fifth steering wheel, controlled by a pedal system, enables straight-line movement or free roaming.
• Two foldable, height-adjustable stainless steel IV poles with four hooks each are complemented by additional IV sockets on the bed’s edges.
• The foldable emergency push handle enhances control and speed in urgent situations.
• Soft, impact-absorbing bumper wheels at each corner protect the stretcher, the environment, and the patient during impacts.
×

OTE03 Luxurious Electric Operating Table
• Hydraulic system, high safety and reliability
• Longitudinal shift function
• Back-rest -20°-80°, knee-rest -90°-15°,head-rest -90º-45º, trendelenburg and reverse trendelenburg 25°, lateral tilt 20°, height adjustment 700mm-1000mm
• Back section with X ray cassette layer
• Memory foam pads
• Stainless steel frame
• Electric brake system for optimum stability
• Detachable head plate and leg plate meet operation position needs
• One key reset function
• Hand control buttons are simple, intuitive and easy to operate
• Kidney bridge lifting
×

ETE01 Electric Examination Table
• Removable pillow
• Face hole for ergonomic body positioning
• Steel frame, high-quality PVC surface, high resilience sponge inside
• Height adjustment 480mm-850mm, leg section lifting 0°-75°±5°, head section adjustment -65° -35°±5°,  waist lifting 25°.
• Armrest is removable and adjustable
• Back section 10 level lifting system, fit different needs
• 2 moving casters
• Gas spring system
×

TX-2 Electric Hospital Dialysis Chair
• Multi-position adjustment, using high-performance imported noiseless motor, easy adjustment of backrest and legs.
• Hand control buttons are simple, intuitive and easy to operate.
• High-density sponge mattress, long sitting and lying will not get tired.
• PVC leather,durable, luxurious and comfortable.
• Retractable, foldable footrest provides comfort for patients during dialysis.
• The lateral adjustable handrail is designed to provide the best dialysis position for the patient.
×

CBD100 Blood Donation Chair
• Purpose-built design
• Sturdy plastic steel frame
• PU leather surface filled with high-quality sponge
• Functional feet covers
×

OBT209 Hospital Overbed Table
• ABS white table top
• 2.5’’ caster with brake
• T-shaped base, dual-material construction
• Aluminium alloy lifting column
• Handle adjust the height, 740mm-1040mm
×

BSC100 Hospital Bedside Cabinet ABS Storage
Hospital bedside cabinets play a crucial role in providing patients with a convenient and organized space for storing personal belongings and essential medical supplies. One material that has gained popularity in the manufacturing of BSC100 cabinets is ABS (Acrylonitrile Butadiene Styrene).
1. Durability and Strength
2. Hygienic and Easy to Clean
3. Versatile storage option
4. Aesthetically pleasing design
5. Noise reduction
BSC100 ABS hospital bedside cabinets offer a myriad of benefits to both patients and healthcare professionals. With their durability, ease of cleaning, versatile storage options, and aesthetically pleasing designs, ABS cabinets provide a reliable and efficient solution for maintaining organization and hygiene in hospital rooms. ABS bedside cabinets not only enhances the patient experience but also contributes to the overall safety and efficiency of healthcare facilities.
×

CAC01 Hospital Sleeper Chair
• Recliner and seat dual-purpose companion chair
• Leather chair surface
• 360° full smooth welding
• Armrest as side rail design
• 2 inch 3 inch wheel combination
• Effort-saving lifting rope when standing up
×

CAC02 Hospital Sleeper Folding Sofa Bed
• Recliner and seat dual-purpose companion chair
• PU leather chair surface
• Wooden handrail
• Effort-saving lifting rope when standing up
• High quality springback sponge
×

BMW2S1 Table Board Manual Hospital Bed
• Robot 360°full smooth welding technology
• Back-rest 75°±10°, knee-rest 35°±10°
• ABS material injected plastic bed end, with safe lock
• Anti-pinch design 6 column metal collapsible side rail
• Fodable ABS table board
• 2 ABS manual cranks control the 2 functions
×

BM50 Multi-Functional Manual Medical Bed
• Back section adjusts up to 75°, leg section up to 35°, Trendelenburg and Reverse Trendelenburg12° for patient comfort and medical needs.
• Bed height can be adjusted between 455mm and 745mm to facilitate patient transfers and caregiver ergonomics.
• Equipped with 380mm high PP side rails with a damped lift design for patient protection.
• ABS detachable bed head and foot boards.
• 5” double-side casters that pass dynamic tests for durability, featuring an anti-winding design.
• Central locking pedals located at the bed’s tail for easy engagement of brakes on all casters simultaneously.
• Full stainless steel IV pole, capable of bearing 15kg, with provisions for placement at each bed corner.
• ABS Hand cranks and structural components built to withstand extensive use, ensuring longevity.
×

BE31 Three Function Full Electric Bed
• Leg-rest 35°±10°, Back-rest 75°±10°, Trendelenburg&Reverse Trendelenburg 12°±3°, height adjustment 455mm-745mm.
• ABS bed head and foot board, can be detached.
• 6 column metal side rail, can be foldable with a button.
• The hospital bed features durable, noise-reducing, and corrosion-resistant 125mm TPE casters with independent brakes and anti-winding design, suitable for various medical environments.
• Each linear motor in the hospital bed controls a specific function, operates below 50 dB, and is designed for a long life with 20,000 movements.
• Soft plastic bumper covers are located at each corner of the hospital bed to absorb impacts and protect the bed and surroundings while minimizing disturbances to patients.
• The bed is equipped with an adjustable stainless steel IV pole with four hooks and previsions at each corner for flexible medical setups.
• The hand controller, connected by a cable and equipped with a hook, controls adjustments for the back and leg sections, overall bed height, and synchronized movements, enhancing convenience and functionality.
×

BE50B Hospital Electric Medical Bed
The BE50B functional electric hospital beds are designed to cater to the diverse and critical needs of patients in an intensive care unit. This versatile bed offers functionalities such as adjustable height, back-rest, and knee-rest, providing healthcare professionals with the ability to customize the patient’s positioning for optimal comfort and care. Additionally, the trendelenburg and reverse trendelenburg features enable effective positioning for medical procedures and improved patient circulation. The bed’s electric functionality not only enhances efficiency for caregivers but also ensures smooth and precise adjustments for patient comfort.
×

BE32A Three Function Full Electric Bed
• Bed height adjustment 455-745mm, back-rest 75°±10°, knee-rest 35°±10°
• PP side rail, foldable
• ABS bed end, with safe lock
• One-time stamping smooth bed board
• 5’’double-side caster, with central locking pedal
×

BE23 Two Function Full Electric Hospital Bed
• Full electric hospital beds are designed with patient comfort and medical efficiency in mind.
• They feature adjustable back and leg sections that are controlled by quiet linear motors.
• Back-rest 75°±10°, Knee-rest 35°±10°.
• Safety is prioritized with full-length metal side rails that have secure locking and anti-entrapment features.
• Bumper covers at each corner protect the bed and the facility’s walls during movement.
• Mobility is enhanced by anti-winding casters equipped with independent brakes for secure positioning.
• IV pole are available at each corner, supporting versatile medical care, with multiple hooks can be adjusted in height to suit various needs.
• An accessible hand controller allows for easy operation of bed adjustments by patients or caregivers.
• A monkey pole at the head of the bed enables patients to reposition themselves, aiding in independence and recovery.
×

BE71 Multifunction Electric ICU Bed
 
• Robot 360°smooth welding
• Galvanized cold-rolled steel, briquetted by a one-time impact process platform
• ABS bed ends, curved shape, with safe lock
• PP side rail, built-in operating panel and angle display
• Electric and manual CPR release
• Back section auto-regression design
• Back-rest 75°±10°, knee-rest 35°±10°, trendelenburg and reverse trendelenburg 12°±3°, height adjustment 500mm-950mm, extension 2040mm-2240mm
• TPE 6’’double-side casters, with central locking
×

BAM203 Hospital Mattress
KSh220,000 Original price was: KSh220,000.KSh200,000Current price is: KSh200,000.
• Size can be customized
• PU cover
• High-density sponge core
 
Add to cart
×

STC54 Hospital Stainless Steel Cart
KSh100,000
• Utilizing precision cutting and seamless welding technology
• Two shelves maximizing the utility
• The guardrails along the sides provides protection against item displacement
• 4-inch casters, including two with independent brake pedal
Add to cart
×

MC21S Multi-functional Monitor Cart
• Robust security with a central locking system for the drawers.
• Ergonomic design featuring an adjustable upper column for monitor positioning.
• Sliding side shelf to provide additional workspace when needed.
• Customizable computer accessories to suit varying technological requirements.
• Four-layer self-priming drawer system with configurable dividers for organized storage.
• Silent, medical-grade 4-inch dual-wheel casters with brakes for easy maneuverability and stability.
• Ring-shaped anti-collision handle to protect both the workstation and staff.
• Electromechanical layer designed for optimal heat dissipation to protect medication integrity.
• Color-coded waste bins to ensure proper segregation and disposal of medical waste.
×

AT85 ABS Anaesthesia Cart
• Constructed from durable ABS and aluminum alloy for strength and corrosion resistance.
• Equipped with multiple drawers (two small, two medium, one large) that include adjustable dividers for customizable storage.
• Features two rows of five transparent compartments each, mounted on an adjustable height stand for flexible positioning.
• Incorporates a retractable side shelf that can be used as an additional workspace or for placing larger medical equipment.
• Oxygen cylinder holder and CPR board on back.
• Offers a centralized locking mechanism controlling all drawers with a single key for enhanced security.
• Fitted with four-inch dual-wheel casters, two of which have brakes, made from high-strength polyurethane for smooth, quiet mobility.
• Contains two separate dust baskets to facilitate the segregation of medical waste.
• Features a high-visibility yellow, secure compartment for the disposal of sharps.
• Includes a semi-transparent, side-opening file box for easy access and visibility of stored documents.
×

HPT03S Patient Transfer Stretcher
• The back section can be raised up to 75°±5° using a lever, supported by a gas spring for smooth control.
• The knee section can bed raised up to 30°±5°using a hand crank.
• Trendelenburgand teverse Trendelenburg can be raised up to 15°±5°, whole stretcher can be raised from 600mm to 903mm, using control pedal.
• Dual hydraulic pumps adjust the stretcher’s height and tilt for precise positioning and patient comfort.
• Foldable metal side rail with safe lock, more safety.
• Whole platform X-ray translucent, with movable x-ray box controlled by hand crank.
• The stretcher is equipped with four 200mm diameter TPE wheels for easier maneuverability and durability.
• Central locking pedals at both ends of the stretcher allow for all wheels to be quickly locked or released.
• A fifth steering wheel, controlled by a pedal system, enables straight-line movement or free roaming.
• Two foldable, height-adjustable stainless steel IV poles with four hooks each are complemented by additional IV sockets on the bed’s edges.
• The foldable emergency push handle enhances control and speed in urgent situations.
• Soft, impact-absorbing bumper wheels at each corner protect the stretcher, the environment, and the patient during impacts.
×

OTE03 Luxurious Electric Operating Table
• Hydraulic system, high safety and reliability
• Longitudinal shift function
• Back-rest -20°-80°, knee-rest -90°-15°,head-rest -90º-45º, trendelenburg and reverse trendelenburg 25°, lateral tilt 20°, height adjustment 700mm-1000mm
• Back section with X ray cassette layer
• Memory foam pads
• Stainless steel frame
• Electric brake system for optimum stability
• Detachable head plate and leg plate meet operation position needs
• One key reset function
• Hand control buttons are simple, intuitive and easy to operate
• Kidney bridge lifting
×

ETE01 Electric Examination Table
• Removable pillow
• Face hole for ergonomic body positioning
• Steel frame, high-quality PVC surface, high resilience sponge inside
• Height adjustment 480mm-850mm, leg section lifting 0°-75°±5°, head section adjustment -65° -35°±5°,  waist lifting 25°.
• Armrest is removable and adjustable
• Back section 10 level lifting system, fit different needs
• 2 moving casters
• Gas spring system
×

TX-2 Electric Hospital Dialysis Chair
• Multi-position adjustment, using high-performance imported noiseless motor, easy adjustment of backrest and legs.
• Hand control buttons are simple, intuitive and easy to operate.
• High-density sponge mattress, long sitting and lying will not get tired.
• PVC leather,durable, luxurious and comfortable.
• Retractable, foldable footrest provides comfort for patients during dialysis.
• The lateral adjustable handrail is designed to provide the best dialysis position for the patient.
×

CBD100 Blood Donation Chair
• Purpose-built design
• Sturdy plastic steel frame
• PU leather surface filled with high-quality sponge
• Functional feet covers
×

OBT209 Hospital Overbed Table
• ABS white table top
• 2.5’’ caster with brake
• T-shaped base, dual-material construction
• Aluminium alloy lifting column
• Handle adjust the height, 740mm-1040mm
×

BSC100 Hospital Bedside Cabinet ABS Storage
Hospital bedside cabinets play a crucial role in providing patients with a convenient and organized space for storing personal belongings and essential medical supplies. One material that has gained popularity in the manufacturing of BSC100 cabinets is ABS (Acrylonitrile Butadiene Styrene).
1. Durability and Strength
2. Hygienic and Easy to Clean
3. Versatile storage option
4. Aesthetically pleasing design
5. Noise reduction
BSC100 ABS hospital bedside cabinets offer a myriad of benefits to both patients and healthcare professionals. With their durability, ease of cleaning, versatile storage options, and aesthetically pleasing designs, ABS cabinets provide a reliable and efficient solution for maintaining organization and hygiene in hospital rooms. ABS bedside cabinets not only enhances the patient experience but also contributes to the overall safety and efficiency of healthcare facilities.
×

CAC01 Hospital Sleeper Chair
• Recliner and seat dual-purpose companion chair
• Leather chair surface
• 360° full smooth welding
• Armrest as side rail design
• 2 inch 3 inch wheel combination
• Effort-saving lifting rope when standing up
×

CAC02 Hospital Sleeper Folding Sofa Bed
• Recliner and seat dual-purpose companion chair
• PU leather chair surface
• Wooden handrail
• Effort-saving lifting rope when standing up
• High quality springback sponge
×

BMW2S1 Table Board Manual Hospital Bed
• Robot 360°full smooth welding technology
• Back-rest 75°±10°, knee-rest 35°±10°
• ABS material injected plastic bed end, with safe lock
• Anti-pinch design 6 column metal collapsible side rail
• Fodable ABS table board
• 2 ABS manual cranks control the 2 functions
×

BM50 Multi-Functional Manual Medical Bed
• Back section adjusts up to 75°, leg section up to 35°, Trendelenburg and Reverse Trendelenburg12° for patient comfort and medical needs.
• Bed height can be adjusted between 455mm and 745mm to facilitate patient transfers and caregiver ergonomics.
• Equipped with 380mm high PP side rails with a damped lift design for patient protection.
• ABS detachable bed head and foot boards.
• 5” double-side casters that pass dynamic tests for durability, featuring an anti-winding design.
• Central locking pedals located at the bed’s tail for easy engagement of brakes on all casters simultaneously.
• Full stainless steel IV pole, capable of bearing 15kg, with provisions for placement at each bed corner.
• ABS Hand cranks and structural components built to withstand extensive use, ensuring longevity.
×

BE31 Three Function Full Electric Bed
• Leg-rest 35°±10°, Back-rest 75°±10°, Trendelenburg&Reverse Trendelenburg 12°±3°, height adjustment 455mm-745mm.
• ABS bed head and foot board, can be detached.
• 6 column metal side rail, can be foldable with a button.
• The hospital bed features durable, noise-reducing, and corrosion-resistant 125mm TPE casters with independent brakes and anti-winding design, suitable for various medical environments.
• Each linear motor in the hospital bed controls a specific function, operates below 50 dB, and is designed for a long life with 20,000 movements.
• Soft plastic bumper covers are located at each corner of the hospital bed to absorb impacts and protect the bed and surroundings while minimizing disturbances to patients.
• The bed is equipped with an adjustable stainless steel IV pole with four hooks and previsions at each corner for flexible medical setups.
• The hand controller, connected by a cable and equipped with a hook, controls adjustments for the back and leg sections, overall bed height, and synchronized movements, enhancing convenience and functionality.
×

BE50B Hospital Electric Medical Bed
The BE50B functional electric hospital beds are designed to cater to the diverse and critical needs of patients in an intensive care unit. This versatile bed offers functionalities such as adjustable height, back-rest, and knee-rest, providing healthcare professionals with the ability to customize the patient’s positioning for optimal comfort and care. Additionally, the trendelenburg and reverse trendelenburg features enable effective positioning for medical procedures and improved patient circulation. The bed’s electric functionality not only enhances efficiency for caregivers but also ensures smooth and precise adjustments for patient comfort.
×

BE32A Three Function Full Electric Bed
• Bed height adjustment 455-745mm, back-rest 75°±10°, knee-rest 35°±10°
• PP side rail, foldable
• ABS bed end, with safe lock
• One-time stamping smooth bed board
• 5’’double-side caster, with central locking pedal
×

BE23 Two Function Full Electric Hospital Bed
• Full electric hospital beds are designed with patient comfort and medical efficiency in mind.
• They feature adjustable back and leg sections that are controlled by quiet linear motors.
• Back-rest 75°±10°, Knee-rest 35°±10°.
• Safety is prioritized with full-length metal side rails that have secure locking and anti-entrapment features.
• Bumper covers at each corner protect the bed and the facility’s walls during movement.
• Mobility is enhanced by anti-winding casters equipped with independent brakes for secure positioning.
• IV pole are available at each corner, supporting versatile medical care, with multiple hooks can be adjusted in height to suit various needs.
• An accessible hand controller allows for easy operation of bed adjustments by patients or caregivers.
• A monkey pole at the head of the bed enables patients to reposition themselves, aiding in independence and recovery.
×

BE71 Multifunction Electric ICU Bed
 
• Robot 360°smooth welding
• Galvanized cold-rolled steel, briquetted by a one-time impact process platform
• ABS bed ends, curved shape, with safe lock
• PP side rail, built-in operating panel and angle display
• Electric and manual CPR release
• Back section auto-regression design
• Back-rest 75°±10°, knee-rest 35°±10°, trendelenburg and reverse trendelenburg 12°±3°, height adjustment 500mm-950mm, extension 2040mm-2240mm
• TPE 6’’double-side casters, with central locking